TM 5-3810-305-23
0066
REMOVAL - Continued
Side Sloping Dash Panel
NOTE
It is not necessary to remove side sloping panel to remove switches.
Tag wires to aid installation.
1.
Remove screw (Figure 6, Item 2) from knob (Figure 6, Item 3). Pull knob off ignition switch (Figure 6, Item 1)
and remove nut (Figure 6, Item 4).
2.
Pull ignition switch (Figure 6, Item 1) through back of sloping dash panel (Figure 6, Item 6).
3.
Disconnect wires (Figure 6, Item 5) from switch (Figure 6, Item 1).
2
1
3,4,5
6
M0505105
Figure 6. Side Sloping Dash Panel Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00072)