TM 5-3810-305-23
0086
REMOVAL - Continued
6.
Remove two grommets (Figure 2, Item 4) and grommet (Figure 2, Item 3) from rear cab panel.
7.
Push two cables (Figure 2, Item 2) and cable (Figure 2, Item 1) through rear cab panel.
3
1
2
4
4
M2116105
Figure 2.
Transmission Cable Removal.
8.
Remove nut (Figure 3, Item 6), washer (Figure 3, Item 5), washer (Figure 3, Item 4), and clamp
(Figure 3, Item 3) from two cables (Figure 3, Item 1). Cut and remove three wire ties (Figure 3, Item 2) from
two cables.
9.
Remove two locknuts (Figure 3, Item 9), washers (Figure 3, Item 8), clamps (Figure 3, Item 11), and
washers (Figure 3, Item 7) from cable (Figure 3, Item 10). Discard locknuts.
10.
Near center of vehicle, cut and remove wire tie (Figure 3, Item 2) from cable (Figure 3, Item 10).
2
3,4,5,6
7
8
1
9
11
10
M2117105
Figure 3.
Transmission Cable Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00093)