TM 5-3810-305-23
0093
ASSEMBLY
Rear Driveshaft
1.
Install three grease fittings (Figure 11, Item 3).
2.
Install dust cap (Figure 11, Item 5) on stub yoke assembly (Figure 11, Item 7).
3.
Install split washer (Figure 11, Item 6), felt washer (Figure 11, Item 10), and split washer (Figure 11, Item 1)
on stub yoke assembly (Figure 11, Item 7).
4.
Install stub yoke (Figure 11, Item 7) into slip yoke assembly (Figure 11, Item 3).
5.
Tighten dust cap (Figure 11, Item 5).
6.
Install rear spider bearing assembly (Figure 11, Item 9) and four capscrews (Figure 11, Item 1) on yoke
assembly (Figure 11, Item 4).
7.
Install front spider bearing assembly (Figure 11, Item 2) and four capscrews (Figure 11, Item 1) on stub yoke
(Figure 11, Item 7).
8.
Tighten eight capscrews (Figure 11, Item 1) to 50 ft-lb (68 Nm).
2
1
3
4
5
9
6
7
3
8
3
M0200105
1
Figure 11. Rear Driveshaft Assembly.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00103)