TM 5-3810-305-23
0144
INSTALLATION
1.
Install new o-ring (Figure 2, Item 1) in beaded insert (Figure 2, Item 2).
2.
Position beaded insert (Figure 2, Item 2) on vehicle and install capscrews (Figure 2, Item 4) and four new
lockwashers (Figure 2, Item 3).
3.
Install new o-ring (Figure 2, Item 18) in beaded insert (Figure 2, Item 17).
4.
Position beaded insert (Figure 2, Item 17) on vehicle.
5.
Install four capscrews (Figure 2, Item 15) and four new lockwashers (Figure 2, Item 16).
6.
Position T-bolt clamp (Figure 2, Item 5) on hose (Figure 2, Item 6).
7.
Install hose (Figure 2, Item 6) on beaded insert (Figure 2, Item 2) and tighten T-bolt clamp (Figure 2, Item 5).
8.
Install T-bolt clamp (Figure 2, Item 5) on hose (Figure 2, Item 14).
9.
Install hose (Figure 2, Item 14) on beaded insert (Figure 2, Item 17) and tighten T-bolt clamp
(Figure 2, Item 5).
10.
Install two T-bolt clamps (Figure 2, Item 13) on hoses (Figure 2, Items 6 and 14).
11.
Install pump suction tube (Figure 2, Item 9) in hoses (Figure 2, Items 6 and 14) and tighten two T-bolt
clamps (Figure 2, Item 13).
12.
Position pump suction tube (Figure 2, Item 9) and install two half clamps (Figure 2, Item 12), two cover
plates (Figure 2, Item 11), and four capscrews (Figure 2, Item 10).
13.
Install four clamps (Figure 2, Item 7) on hose (Figure 2, Item 8).
14.
Install hose (Figure 2, Item 8) on suction hose (Figure 2, Item 9) and tighten four clamps (Figure 2, Item 7).
15.
Fill hydraulic reservoir (TM 5-3810-305-10).
16.
Close dipstick cap.
0144-4
03/15/2011Rel(1.8)root(maintwp)wpno(M00161)
