TM 5-3810-305-23
0145
REMOVAL - Continued
6.
Disconnect six hoses (Figure 1, Item 12) from bottom of manifold (Figure 1, Item 1). Remove six adapters
(Figure 1, Item 14) and o-rings (Figure 1, Item 13) from bottom of manifold. Discard o-rings.
NOTE
Record port number stamped on manifold and type of quick disconnect in each port
before removal.
7.
Disconnect six hoses and remove quick disconnects (Figure 1, Items 2, 8 and 18) from fittings
(Figure 1, Items 3 and 9) on side of manifold (Figure 1, Item 1).
8.
Remove o-rings (Figure 1, Items 7 and 15 ) from elbows (Figure 1, Items 6 and 16). Discard o-rings.
9.
Remove o-rings (Figure 1, Items 5, 11 and 15 ) from fittings (Figure 1, Items 4, 10 and 19). Discard o-rings.
1
2
2
3
3
4
7
4
5
5
14
6
13
6
7
12
9
8
11 10
11
10
16
9
15
17
8
18
19
15
20
M2111105
Figure 1. Rotary Manifold Quick Disconnects (Type II) Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00162)