TM 5-3810-305-23
0161
REMOVAL
1.
Rotate upperstructure to the right.
2.
With adequate hoist and sling, support swing gearbox (Figure 1, Item 1).
NOTE
It will be necessary to rotate upperstructure by hand to access rear hardware.
3.
Attach a wrench to protruding shaft of swing box drive. Turn swing box drive clockwise to swing upperstructure
to the right and counterclockwise to swing upperstructure to the left.
4.
Remove four nuts (Figure 1, Item 2), washers (Figure 1, Item 3), spacers (Figure 1, Item 4), and capscrews
(Figure 1, Item 5).
5.
Lower swing gearbox (Figure 1, Item 1) out of pilot hole and remove from vehicle.
1
5
4
3
2
M0598105
Figure 1.
Swing Gearbox Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00180)