TM 5-3810-305-23
0161
DISASSEMBLY
WARNING
DO NOT disconnect or remove any hydraulic system lines or fitting unless engine is shut
down and hydraulic system pressure has been relieved. Tighten all connections before
applying pressure. Escaping hydraulic fluid under pressure can penetrate the skin.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
Wear protective eye covering.
Avoid sudden movement of vehicle.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
Failure to follow these warnings may result in injury or death to personnel.
1.
Remove two drain plugs (Figure 2, Item 2) from cover (Figure 2, Item 1).
2.
Remove pipe plug (Figure 2, Item 6) from housing (Figure 2, Item 5).
3.
Drain oil into suitable container.
4.
Remove six capscrews (Figure 2, Item 4) and lockwashers (Figure 2, Item 3) from horn cover
(Figure 2, Item 1). Discard lockwashers.
5.
Remove cover (Figure 2, Item 1) from housing (Figure 2, Item 5).
2
3
1
4
5
6
M0599105
Figure 2. Swing Gearbox Disassembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00180)