TM 5-3810-305-23
FIELD MAINTENANCE
SWING GEARBOX MAINTENANCE
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Parts Kit, Seal Repl (WP 0172, Table 1, Item 3)
Tool Kit, General Mechanic's (WP 0171, Table 1,
Item 17)
Qty: 1
Puller Set, Mechanical (WP 0171, Table 1, Item
Rag, Wiping (WP 0170, Table 1, Item 52) Qty: 1
38)
Washer, Lock (WP 0172, Table 1, Item 166)
Suitable Lifting Device, 500-lb (227 kgs) Minimum
Qty: 10
Capacity
Wrench, Torque, 1/2 Inch Drive Ratcheting, 250 ft-
Personnel Required
lb (WP 0171, Table 1, Item 33)
(Two)
Wrench, Torque, Click, 1/2 Inch Drive, 75 ft-lb
(WP 0171, Table 1, Item 35)
References
Materials/Parts
Antiseize Compound (WP 0170, Table 1, Item 5)
Qty: 1
Equipment Condition
Grease, Automotive and Artillery (WP 0170, Table
Battery cables disconnected (WP 0076)
1, Item 20) Qty: 1
Deck plates removed (WP 0122)
Parts Kit, Bearing R (WP 0172, Table 1, Item
Swing motor removed (WP 0160)
171) Qty: 1
WARNING
Weight of swing gearbox is approximately 125 lb (57 kg). Use adequate lifting equipment to
lift and support swing gearbox. DO NOT lift over personnel or let personnel walk underneath
suspended load. Failure to follow this warning may cause injury or death to personnel.
0161-1
03/15/2011Rel(1.8)root(maintwp)wpno(M00180)