TM 5-3810-305-23
0160
ASSEMBLY - Continued
17.
Apply a small amount of grease to seal ring (Figure 14, Item 3) and insert seal ring into end cover
(Figure 14, Item 2) seal ring groove.
18.
Install end cover (Figure 14, Item 2) assembly onto housing (Figure 14, Item 5) with seal ring
(Figure 14, Item 3) against housing and align end cover bolt holes with housing bolt holes.
19.
Install seven bolts (Figure 14, Item 1) finger tight. Tighten seven bolts to 22 to 26 ft-lb (30 to 35 Nm).
1
2
3
4
5
M0461105
Figure 14.
Swing Motor Assembly.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00179)