TM 5-3810-306-20
3.
INSPECT PARTS FOR DAMAGE. REPLACE AS
REQUIRED.
a. Inspect filter element (4) for metal chips or
flakes. If found, retain filter element (4) and
contact Direct Support maintenance regarding
possible
torque
converter/transmission
problems. If none are found, discard filter
element (4).
INSTALLATION:
1.
INSTALL FILTER ELEMENT (4), GASKET (6) AND
FILTER HOUSING (1).
a. Apply oil on gasket (6). Put gasket (6) in groove
on filter housing (1).
b. Put filter element (4) in filter housing (1).
c. Hold filter housing (1) into place against head
assembly (5).
d. Screw in bolt (3). Torque bolt (3) between 25-35
lb-ft (34-47 Nm).
2.
SERVICE TRANSMISSION/TORQUE
CONVERTER OIL (REFER TO LO 5-3810306-12).
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
END OF TASK
9-15/9-16 Blank
