TORQUE CONVERTER OIL FILTER ASSEMBLY INSTALLATION

TRANSMISSION TO TORQUE CONVERTER HYDRAULIC LINES

TORQUE CONVERTER OIL FILTER ASSEMBLY INSTALLATION - cont

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
255

TM 5-3810-306-20 TORQUE CONVERTER OIL FILTER ASSEMBLY INSTALLATION TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033) Drain pan SUPPLIES: Clean rags (Item 1, Appendix C) Lockwashers (Item 5, Appendix C) Preformed packings Item 84, Appendix C) (2 Required) Preformed packings Item 27, Appendix C) (3 Required) EQUIPMENT CONDITION: Transmission is drained. (Refer to LO 5-3810-306-10.) Disconnect ground cable at shunt. (Refer to page 8-109.) REMOVAL: NOTE Get set to catch oil in pan. 1. DISCONNECT TWO TRANSMISSION OIL LINES (1, 2). a. Disconnect flow "IN" oil line (1) from elbow (11). Cap line (1). b. Disconnect flow "OUT" oil line (2) from elbow fitting (4). Cap line (2). 2. DISCONNECT HEAD ASSEMBLY (3) AND SAMPLE VALVE (9). a. Remove four nuts (5), flatwashers (10) and lockwashers (6). Discard lockwashers (6). b. Remove elbow fittings (4 and 11) from head assembly (3). Discard preformed packings (8). c. Remove sampling valve (9) from elbow fitting (11). Discard preformed packings (7). 3. INSPECT PARTS FOR DAMAGE. REPLACE AS REQUIRED. 9-12

Privacy Statement
Press Release
Contact