TM 5-3810-306-20
b. Remove decking (20) being careful not to
damage pump disconnect knob.
INSTALLATION:
1.
INSTALL FRONT FENDER(S) (1 AND 2).
WARNING
When installing fender, be aware of
pinch points. Use care to avoid
injury.
NOTE
Ensure
spacer
plates
(18)
are
installed in correct locations.
a. Align fender (1 or 2) with mounting studs using
lifting device.
b. Install washers (5), new lockwashers (4) and
nuts (3) to secure fender.
c. Install non-slip strips (19) as required.
2.
INSTALL REAR FENDER(S) (6 AND 7).
a. Align fender with mounting studs using lifting
device.
b. Install fender to hydraulic tank cover with
capscrews and washers. (Right rear fender
only).
15-17
