TM 5-3810-306-20
TOOL BOX COVER
TOOLS:
General mechanic’s tool kit: automotive (5180-00-177-7033)
Lifting device (2 ton (1812 Kg) capacity)
SUPPLIES:
Lockwashers (Item 15, Appendix C) (5 Required)
Lockwashers (Item 2, Appendix C) (2 Required)
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE TOOL BOX COVER (1).
a. Remove four screws (5) and access cover (6)
from tool box cover (1).
b. Locate and remove two nuts (2), lockwashers (3)
and flatwashers (4), securing tool box cover (1)
to frame studs. Discard lockwashers (3).
c. Locate and remove three capscrews (7),
lockwashers (8) and flatwashers (9) securing
cover to engine hood. Discard lockwashers (8).
d. Tag and disconnect five electrical connectors to
two lights.
e. Using a suitable lifting device support tool box
cover.
f.
Remove thirteen screws (10) and flatwashers
(11). Remove tool box cover (1).
g. Remove attaching hardware and lights from tool
box cover (1) if necessary.
h. If door needs replacement, unscrew two self-
tapping screws (12) and lockwashers (13) and
slide door from hinges. Discard lockwashers
(13).
15-24
