TM 5-3810-306-20
c. Secure fender to frame side rail and hood with
capscrews (12), flatwashers (13) and new
lockwashers (14). Install spacer plates (18) on
studs and secure on frame side rail with four hex
nuts
(15),
new
lockwashers
(16)
and
flatwashers (17).
d. Install non-skid strips (19) to fender surface.
3.
INSTALL DECK COVER AND TREAD.
a. Install tread (11) and secure with flatwashers
(10), new lockwashers (9) and hex nuts (8).
b. Install rear decking (20) and secure with
flatwashers (23), new lockwashers (22) and nuts (21).
4.
INSTALL BATTERY/TOOL BOX COVER. (REFER
TO PAGE 8-98.)
5.
SECURE AIR CLEANER TO FENDER. CONNECT
AIR INLET TUBE TO AIR CLEANER. (REFER TO
PAGE 5-2.)
6.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
END OF TASK
15-18
