TM 5-3810-306-20
INSTALLATION:
1.
INSTALL TOOL BOX COVER (1).
a. If removed, install lights in tool box cover.
b. Using suitable lifting device, position tool box
cover in place and secure using thirteen screws
(10) and flatwashers (11).
c. Remove tags and connect five electrical
connectors to two lights (9).
d. Install three capscrews (7), new lockwashers (8)
and flatwashers (9) securing tool box cover (1) to
engine hood.
e. Install two nuts (2), new lockwashers (3) and
flatwashers (4) securing tool box cover (1) to
frame studs.
f.
Position access cover (6) over hole and secure
with four screws (5).
g. Install tool box cover door, if removed, using two
self-tapping screws (12) and new lockwashers
(13).
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
END OF TASK
15-25
