TM 5-3810-307-24-2-2
Fuel Transfer Pump - Removal (0-
44)
10 mm
Remove the fuel transfer pump, spacer, and gaskets.
NOTE
Refer to Component Section 6 for fuel
transfer pump test procedures.
Tappet Cover - Removal (0-45)
10 mm
Remove the tappet cover and gasket.
Side Oil Fill - Removal (0-46)
18 mm
If present, remove the capscrews, side oil fill
assembly and rectangular ring seal. Some engines
may have an air compressor oil drain connection
attached at this location. Remove the connection and
rectangular ring seal.
Oil Cooler - Removal (0-47)
90-95 mm [3-1/2 to 3 7/8 in] Filter Wrench
Remove the oil filter.
