TM 5-3810-307-24-2-2
Accessories - Removal (0-36)
10 mm, 14 mm, 18 mm
If equipped, remove all additional gear driven
accessories, (air compressor, hydraulic pump, etc.).
NOTE
Refer to the Manufacturer's
Service
Information for repair instructions.
Injection Pump - Removal (In-Line)
(0-41)
CAUTION
A diesel engine cannot tolerate dirt or water
in the fuel system. A tiny piece of dirt or a few
drops of water in the injection system can
cause damage to the system.
Clean all external surfaces of the injection pump,
including all line connections and fittings that are to
be disconnected. Clean the area around the injection
pump gear cover to prevent dirt from entering the
Preparatory Steps:
Remove all fuel lines.
Remove the control linkage.
Remove the fuel shutoff solenoid.
Remove the fuel filter.
Remove the fuel pump support bracket.
14 and 15 mm
Disconnect the lubricating oil supply line from the fuel
pump.
Disconnect the lubricating oil supply line from the
engine block.