TM 5-3810-206-35
Caution: Do not connect the oil return
from turbocharger.
Clothing, or
line until it is assured there is a free
damaging objects can be drawn into
flow of oil through turbocharger.
compressor
side,
damaging
Turn crankshaft a few times by hand.
compressor wheel, and discharged
This is to provide bearings with
carbon particles or hot exhaust gas
lubricating oil during initial engine
from turbine side can cause disabling
starting period.
injury to personnel.
(4) Install turbocharger by reversing
the
c. Disassembly.
The turbocharger must be
procedure in steps (1) through (3) above.
disassembled in strict accordance with the following
detailed procedure.
Caution: Never operate the engine
(1) Mount unit in vise or holding fixture (sheets
while the air cleaner and exhaust
manifold, or either, is disconnected
KEY to fig. 3-17:
1
Thrust ring
11
Sleeve
21
Seal
2
Thrust bearing
12
Turbine housing
22
Insert
3
Cover
13
Shims
23
Packing
4
Thrust ring
14
Nut
24
Oil deflector
5
Spacer
15
Compressor impeller
25
Bearing housing
6
Clamps
16
Turbine wheel
26
Vent tube
7
Shaft
17
Seal (2 rqr)
27
Oil drain hole
8
Nozzle
18
Seal (2 rqr)
28
Bearing (2 rqr)
9
Turbine backplate
19
Spacer
29
Sleeve
10
Retaining rings (3 rqr)
30
Oil Slinger
Figure 3-17. Turbocharger details (sheet 2 of 10).
3-20
