Water Manifolds - TM-5-3810-207-20

Section V. CARRIER ENGINE INTAKE AND EXHAUST SYSTEM

TM-5-3810-207-20 Crane-Shovel Basic Unit Truck Mounted: 20 Ton 3/4 Cu.Yd. Gasoline Driven (Quickway Model M-200) Non-Winterized Manual
Page Navigation
159

TM 5-3810-207-20/TO 36C23-3-37-12 B-Lower hose, pipe, and fittings Figure 156-Continued. (2) Remove the hoses from the thermostat cover, radiator, water pump, and water manifolds (par. 257). (3) Remove the thermostat cover and two thermostats (par. 259). (4) Remove the thermostat sending unit and temperature warning light sending unit (pars. 217 and 218). (5) Remove the carrier engine water manifolds as instructed on figure 159. b. Cleaning and Inspection. (1) Clean all parts with an approved cleaning solvent. (2) Inspect all parts for breaks, cracks, leaks, and other damage. Replace all defective parts and gaskets. c. Installation. (1) Install the carrier engine water manifolds as illustrated on figure 159. (2) Install the two thermostats and the thermostat cover (par. 259). (3) Install the hoses on the thermostat cover, water pump, radiator, and water manifolds (par. 257). (4) Install the thermostat sending unit and temperature warning light sending unit (pars. 217 and 218). (5) Fill the cooling system to proper level (TM 5-3810-207-10). 203

Privacy Statement
Press Release
Contact