TM 5-3810-207-20/TO 36C23-3-37-12
Figure 168. Carrier steering valve, removal and installation.
276.
Hydraulic Cylinder
a.
Removal. Remove the hydraulic cylinder as
instructed on figure 169.
b.
Cleaning and Inspection.
(1)
Clean the hydraulic cylinder with an
approved cleaning solvent.
(2)
Inspect the hydraulic cylinder for leaks,
breaks, and other damage. Replace
defective hydraulic cylinder.
c.
Installation. Install the hydraulic cylinder as
illustrated on figure 169.
277.
Steering Assembly Backlash Adjustment
a.
To adjust steering assembly backlash, loosen
locknut (fig. 169) and tighten side cover adjusting screw
until a very slight drag is felt when moving the steering
wheel through mid position.
b.
Hold the adjusting screw and tighten locknut.
c.
Check adjustment through full travel of the
steering wheel.
278.
Steering Wheel
a.
Removal.
(1)
Remove the horn button assembly (par.
226).
(2)
Remove
the
steering
wheel
as
instructed on figure 170.
b.
Cleaning and Inspection.
(1)
Clean all parts with an approved
cleaning solvent.
(2)
Inspect all parts for breaks, cracks, and
other damage.
221
