Figure 66. Carrier engine piston and connecting rod assemblies, removal and installation.
b. Inspection and Repair. Inspect all parts for
b. Installation.
excessive wear and damage. Replace or repair all
defective parts.
(1) Install the carrier engine clutch housing as
261.
Carrier Engine Clutch Housing Reassembly
(3) Connect the transmission controls (TM 5-
and Installation
3810-207-20).
a. Reassembly. Reassemble the carrier engine
207-20).
clutch housing in the reverse of the numerical sequence
Section XVI. CARRIER ENGINE CLUTCH ASSEMBLY
engine. The clutch assembly is fastened to the engine
262.
General
flywheel and an independently driven disk revolves the
clutch unit
A push-type, dry-disk, multiple-levered clutch of
adjustable type construction is used on the carrier
TAGO 5030A
121