c. Reassembly and Installation. Reassemble and
install the pintle hook in the reverse of the numerical
c. Cleaning, Inspection, and Repair.
sequence as illustrated on figure 152.
(1) Clean all parts with an approved cleaning
solvent.
249. Outrigger Assemblies
(2) Inspect all parts for defective conditions.
a. Removal.
(3) Repair or replace damaged parts as
(1) Remove the floats from the outrigger
necessary.
assembly.
d. Reassembly. Reassemble the outrigger beams
(2) Remove the outrigger assembly from the
and the outrigger assembly as illustrated an figure 153.
frame.
e. Installation.
b. Disassembly.
Disassemble the outrigger
(1) Install the outrigger assembly on the carrier
assembly and the outrigger beams as instructed on
frame.
(2) Install the floats on the outrigger assembly.
Figure 152. Pintle hook assembly.
AGO 6819A
171
