254. Operator's Seat
(2) Inspect the cushions for torn or ripped
covers and broken springs. Replace a
a. Removal. Remove the operator's seat from the
damaged cushion as necessary.
cab an illustrated on figure 155.
(3) Inspect the seat frame and suspension for
cracks, breaks, and bends. Straighten
b. Disassembly. Dissemble the operator's seat in
bends and weld all cracks or breaks.
the numerical sequence as instructed on figure 156.
(4) Repair or replace all defective parts as
necessary.
c. Cleaning, Inspection, and Repair.
(1) Clean all parts with an approved cleaning
d. Reassembly. Reassemble the operator's seat in
solvent, except the cushions. Use soap
the reverse of the numerical sequence as illustrated on
and water for cleaning cushions.
e. Installation.
Install the operator's seat as
illustrated on figure 155.
255. Cab Operator's Door
a. Removal. Remove the carrier cab operator's
door as instructed on figure 157.
b. Cleaning, Inspection, and Repair.
(1) Clean all parts with an approved cleaning
solvent.
Figure 156. Operator's seat, disassembly and
reassembly.
Figure 157. Carrier cab door, removal and
installation.
AGO 6819A
174
