Figure 161. Carrier rear fender, removal and
installation.
(2) Install the engine hood and side panel
Figure 160. Carrier right-front fender, removal and
installation.
(3) Install the battery box (para 103).
259. Right-Front Fender
260. Rear Fenders
a. Removal.
a. Removal. Remove the carrier rear fenders as
instructed on figure 161.
(1) Remove the battery box (para. 103).
(2) Remove the engine hood and side panel
b. Cleaning, Inspection, and Repair.
(3) Remove the right-front fender as
(1) Clean all parts with an approved cleaning
instructed on figure 160.
solvent.
(2) Inspect the fender for cracks, breaks, or
bends.
b. Cleaning, Inspection, and Repair.
(3) Repair or replace damaged parts as
(1) Clean all parts with an approved cleaning
necessary.
solvent.
(2) Inspect the fender for damage. Replace a
damaged fender.
c. Installation. Install the carrier rear fenders as
illustrated on figure 161.
(3) Inspect the braces for cracks or breaks.
Replace a damaged brace.
261. Cab and Left-Front Fender
(4) Repair or replace damaged parts as
necessary.
a. Inspection. Inspect the cab and left-front fender
Note
for breaks, cracks, dents, holes, rust, and broken
Minor bends or dents may
be
braces.
straightened and breaks welded.
b. Repair. Weld all cracks, breaks, holes and
c. Installation.
broken braces of the cab and left-front fender. Remove
all dents and refer to TB ENG 60 for painting a repaired
(1) Install the right-front fender as illustrated
cab or fender.
on figure 160.
AGO 6819A
176
