TM 5-3810-305-23
0028
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSTALLATION
1.
Use a suitable prybar in hole of plug wedged between flywheel and bell housing to lock flywheel before installing
crankshaft pulley.
2.
Install crankshaft pulley (Figure 2, Item 3) and four capscrews (Figure 2, Item 2) in vehicle. Tighten four
capscrews to 44 ft-lb (60 Nm).
3.
Install plug (Figure 2, Item 1) in bell housing.
1
2
3
M0010105
Figure 2.
Crankshaft Pulley Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
Install cooling fan (WP 0060).
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00033)
