TM 5-3810-305-23
0044
ASSEMBLY - Continued
11.
Install guide (Figure 22, Item 1), spring (Figure 22, Item 5), and shutoff lever (Figure 22, Item 4) on injection
pump.
12.
Position return spring (Figure 22, Item 5) with one end contacting boss on governor cover. Hook free end
around shutoff lever (Figure 22, Item 4). Rotate lever clockwise until it engages flats on shutoff shaft.
13.
Install washer (Figure 22, Item 3) and new locknut (Figure 22, Item 2). Tighten locknut to 30 in-lb. (3.4 Nm).
2
3
1
4
5
M1514105
Figure 22. Injection Pump Assembly.
14.
Install throttle lever kit (Figure 23, Item 1) and new locknut (Figure 23, Item 2). Stop arm in lever kit must slide
over flats of shaft. Tighten locknut to 30 in-lb. (3.4 Nm).
2
1
M1513105
Figure 23. Injection Pump Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00050)