TM 5-3810-305-23
0102
INSTALLATION - Continued
16.
Additional adjustment can be made on lever. Turn lever handle right to tighten cable, or left to loosen cable.
17.
Loosen jam nut (Figure 14, Item 1) on sensor (Figure 14, Item 2). Using a feeler gage, adjust sensor so the
gap between sensor and parking brake disc measures 0.025 to 0.040 inch (0.64 to 1.02 mm). Tighten jam nut.
18.
Inspect actuator linkage for adequate freedom of movement for positive brake operation.
19.
Fill and bleed brake system (WP 0103).
1
2
M0536105
Figure 14. Parking Brake Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Connect battery cables (WP 0076).
2.
Install constant-velocity joints (WP 0099).
3.
Raise and retract outriggers (TM 5-3810-305-10).
4.
Place boom in resting position (TM 5-3810-305-10).
5.
Check for proper operation.
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00113)