TM 5-3810-305-23
0137
INSTALLATION
1.
Install three new o-rings (Figure 2, Item 3), two elbows (Figure 2, Item 2), and adapter (Figure 2, Item 10) in
axle lockout valve (Figure 2, Item 9). Install elbows (Figure 2, Item 2) pointing down.
2.
Install axle lockout valve (Figure 2, Item 9) in vehicle.
3.
Install two capscrews (Figure 2, Item 1), washers (Figure 2, Item 6), and new locknuts (Figure 2, Item 7).
Do not tighten capscrews (Figure 2, Item 1) at this time.
4.
Install hoses (Figure 2, Items 4, 5, and 8) on axle lockout valve (Figure 2, Item 9).
5.
Close dipstick cap. Start engine. Rotate upperstructure to the travel position and check for leaks.
6.
Open bleed screws on axle lockout cylinders until all air escapes. Tighten bleed screws. Shut OFF engine.
7.
Check hydraulic oil level. Fill to proper level, if necessary (TM 5-3810-305-10).
8.
Adjust axle lockout valve (Figure 2, Item 9).
1
2,3
3,10
2,3
4
9
5
6
7
8
M0322105
Figure 2. Axle Lockout Valve Installation.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00153)