TM 5-3810-305-23
0155
DISASSEMBLY
WARNING
Weight of hook block is approximately 235 lb (107 kg). Use adequate lifting equipment to lift
and support hook block. DO NOT lift over personnel or let personnel walk underneath
suspended load. Failure to follow this warning may cause injury or death to personnel.
1.
Remove three locknuts (Figure 1, Item 4), cotter pin (Figure 1, Item 1) from cable side plate (Figure 1, Item 5).
Discard cotter pin and locknuts.
2.
Separate cable side plate (Figure 1, Item 2) from cable side plate (Figure 1, Item 5).
3.
Remove three tubes (Figure 1, Item 3) from cable side plate (Figure 1, Item 5).
2
1
5
3
4
M0620105
Figure 1. Hook Block Disassembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00171)