TM 5-3810-305-23
0160
REMOVAL
NOTE
Tag all hose and tube assemblies before disconnecting to aid in installation. Cap and plug
all ports. Remove caps, plugs, and tags following maintenance.
1.
Turn dipstick cap 1/4 turn to safety notch to relieve pressure.
2.
Disconnect hydraulic hoses (Figure 1, Items 4 and 5) from two adapters (Figure 1, Item 3).
3.
Remove two adapters (Figure 1, Item 3) from swing motor (Figure 1, Item 2).
4.
Remove two o-rings (Figure 1, Item 6) from adapters (Figure 1, Item 3). Discard o-rings.
5.
Remove two capscrews (Figure 1, Item 1) from swing motor (Figure 1, Item 2).
6.
Remove swing motor (Figure 1, Item 2) from case.
2
3
1
4
5
6
M0460105
Figure 1. Swing Motor Removal.
END OF TASK
DISASSEMBLY
CAUTION
DO NOT clamp housing port area between vise jaws as it might distort housing around
commutator preventing disassembly of commutator. Failure to comply may result in damage
to equipment.
1.
Remove seven bolts (Figure 2, Item 1) from end cover (Figure 2, Item 2).
2.
Remove end cover (Figure 2, Item 2) and seal ring (Figure 2, Item 3) from housing (Figure 2, Item 5).
Discard seal ring.
3.
Remove drive link spacer/washer (Figure 2, Item 4) from housing (Figure 2, Item 5).
03/15/2011Rel(1.8)root(maintwp)wpno(M00179)
