TM 5-3810-305-23
0160
DISASSEMBLY - Continued
5.
Remove wear plate (Figure 4, Item 1), drive link (Figure 4, Item 3), and seal ring (Figure 4, Item 2) from housing
(Figure 4, Item 4). Discard seal ring.
1
2
3
4
M0463105
Figure 4. Swing Motor Disassembly.
6.
Remove commutator (Figure 5, Item 1) from housing (Figure 5, Item 3). Inspect drive pin, replace if necessary.
7.
If necessary, remove drive pin (Figure 5, Item 2) from commutator (Figure 5, Item 1) only if it must be replaced.
1
2
3
M0464105
Figure 5. Swing Motor Disassembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00179)
