TM 5-3810-305-23
0161
ASSEMBLY - Continued
NOTE
Install new seal with sealant on outer diameter of seal. Lubricate seal lip with antiseize
compound.
3.
Install one of two bearing cones (Figure 13, Item 3) and new seal (Figure 13, Item 2) on housing
(Figure 13, Item 1).
4.
Install output shaft (Figure 13, Item 4) in housing (Figure 13, Item 1).
5.
Turn housing (Figure 13, Item 1) over and install remaining bearing cone (Figure 13, Item 3). Press completely
onto shaft (Figure 13, Item 4).
1
2,3
4
M0605105
Figure 13. Swing Gearbox Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00180)
