TM 5-3810-305-23
0161
ASSEMBLY - Continued
6.
Install keys (Figure 14, Item 2) on output shaft (Figure 14, Item 1).
1
2
M0608105
Figure 14.
Swing Gearbox Assembly.
NOTE
When pressing worm gear onto shaft, position worm gear so not to damage bronze
worm gear.
7.
Press worm gear (Figure 15, Item 4) onto output shaft (Figure 15, Item 1) with gear hub facing up.
8.
Install nut (Figure 15, Item 2). Tighten nut to approximately 5 ft-lb (6.8 Nm).
9.
Install capscrew (Figure 15, Item 3). Tighten capscrew to 15 ft-lb (20 Nm).
1
4
3
2
M0609105
Figure 15.
Swing Gearbox Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00180)
