TM 5-3810-305-23
0161
ASSEMBLY - Continued
NOTE
Install seal with sealant on outer diameter of seal. Lubricate seal lip with antiseize
thread compound.
16.
Install new seal (Figure 18, Item 3) and new o-ring (Figure 18, Item 2) on bearing retainer (Figure 18, Item 4).
17.
Install bearing retainer (Figure 18, Item 4) with four new lockwashers (Figure 18, Item 5) and capscrews
(Figure 18, Item 6) into housing (Figure 18, Item 1). Tighten capscrews to 58 ft-lb (79 Nm). Worm gear should
rotate freely by hand.
6
5
5
4
3
1
6
2
5
M0601105
Figure 18. Swing Gearbox Bearing Retainer Assembly.
18.
Install bushing (Figure 19, Item 1) and new o-ring (Figure 19, Item 3) on cover (Figure 19, Item 2).
1
3
2
M0600105
Figure 19. Swing Gearbox Cover Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00180)