TM 5-3810-305-23
0161
ASSEMBLY - Continued
19.
Install cover (Figure 20, Item 1), six new lockwashers (Figure 20, Item 3) and capscrews (Figure 20, Item 4).
Tighten capscrews to 58 ft-lb (79 Nm).
20.
Install two drain plugs (Figure 20, Item 2) in cover (Figure 20, Item 1).
21.
With pinion up and swing gearbox level, fill with gear oil per lubrication chart (TM 5-3810-305-10), or until oil
runs out of fill level hole. Install fill pipe plug (Figure 20, Item 6).
2
3
1
4
5
6
M0599105
Figure 20.
Swing Gearbox Drain Plugs Assembly.
22.
Grease bearings through fitting (Figure 21, Item 2) located under pinion gear in housing (Figure 21, Item 1).
1
2
M0610105
Figure 21.
Swing Gearbox Assembly.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00180)
