TM 5-3810-305-23
0163
IDENTIFICATION - Continued
3.
If cables or wires are replaced, remove tags from old wire and place them on new wire.
4.
All pins (male connectors) and sockets (female connectors) in receptacles and plugs are identified by
alphabetical code. Coded identification starts at the connector key (Figure 2, Item 2) or groove
(Figure 2, Item 1). Male connectors' identifying letters run clockwise and female connectors identifying
letters run counterclockwise.
2
1
M0133105
Figure 2. Electrical Harness Identification.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00186)
