TM 5-3810-305-23
0163
DISASSEMBLY - Continued
Female-Type Plug with Ridged Locking Nut
WARNING
Remove jewelry and disconnect battery negative ground cable before performing
maintenance on this equipment. Failure to follow this warning may result in injury or death
to personnel.
1.
Unscrew nut (Figure 7, Item 2) from shell assembly and slide back on cable.
2.
Push grommet (Figure 7, Item 3) back on cable leads (Figure 7, Item 1).
3.
Push coupling nut (Figure 7, Item 4) off shell (Figure 7, Item 7).
4.
Push socket contacts (Figure 7, Item 5) out through rear of insert (Figure 7, Item 6) with pin extractor.
5.
Push insert (Figure 7, Item 6) out through rear of shell (Figure 7, Item 7).
6.
Unsolder leads (Figure 7, Item 1) from pin contacts (Figure 7, Item 5).
1
2
3
4
5
6
7
M0138105
Figure 7. Electrical Harness Disassembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00186)