TM 5-3810-305-23
0163
ASSEMBLY - Continued
Male-Type Panel Mounting Receptacle
1.
Strip cable insulation equal to depth of solder wells of pin contacts (Figure 17, Item 2).
2.
Insert cable leads (Figure 17, Item 1) into solder wells of pin contacts (Figure 17, Item 2) and solder (use rosin
core solder only).
3.
Push insert (Figure 17, Item 3) into shell (Figure 17, Item 4) from rear until seated. Groove in insert must be
aligned with guide in shell to ensure proper fit.
4.
Push pin contacts (Figure 17, Item 2) into insert (Figure 17, Item 3) from rear until seated.
5.
Tape cable leads as required.
6.
Connect battery cables (WP 0076).
4
3
2
1
M0147105
Figure 17. Electrical Harness Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00186)