TM 5-3810-305-23
0163
ASSEMBLY - Continued
Female-Type Panel Mounting Receptacle
1.
Strip cable insulation equal to depth of solder wells of pin contacts (Figure 18, Item 2).
2.
Insert cable leads (Figure 18, Item 1) into solder wells of socket contacts (Figure 18, Item 2) and solder
(use rosin core solder only).
3.
Push insert (Figure 18, Item 3) into shell (Figure 18, Item 4) from rear until seated. Groove in insert must be
aligned with guide in shell to ensure proper fit.
4.
Push socket contacts (Figure 18, Item 2) into insert (Figure 18, Item 3) from rear until seated.
5.
Tape cable leads as required.
6.
Connect battery cables (WP 0076).
4
3
2
1
M0148105
Figure 18. Electrical Harness Assembly.
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00186)