TM 5-3810-305-23
0163
ASSEMBLY - Continued
Female-Type Plug with Ridged Locking Nut
1.
Strip cable insulation equal to depth of solder wells of socket contacts (Figure 14, Item 5).
2.
Slide nut (Figure 14, Item 2) over cable leads (Figure 14, Item 1).
3.
Slide grommet (Figure 14, Item 3) over cable leads (Figure 14, Item 1).
4.
Insert cable leads (Figure 14, Item 1) into solder wells of socket contacts (Figure 14, Item 5) and solder (use
rosin core solder only).
5.
Push insert (Figure 14, Item 6) into shell assembly (Figure 14, Item 7) from rear until seated. Groove in insert
must be aligned with guide in shell to ensure proper fit.
6.
Push socket contacts (Figure 14, Item 5) into insert (Figure 14, Item 6) from rear until seated.
7.
Slide coupling nut (Figure 14, Item 4) onto shell assembly (Figure 14, Item 7).
8.
Push grommet (Figure 14, Item 3) down cable leads (Figure 14, Item 1) over solder wells of socket contacts
(Figure 14, Item 5)
9.
Screw nut (Figure 14, Item 2) onto shell assembly.
10.
Tape cable leads as required.
11.
Connect battery cables (WP 0076).
1
2
3
4
5
6
7
M0144105
Figure 14. Electrical Harness Assembly.
03/15/2011Rel(1.8)root(maintwp)wpno(M00186)