TM 5-3810-306-20
FRONT CONTROL PANEL
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITION:
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
NOTE
Use this task to remove and install
left or right front control panel (1).
Right front console panel (1) is
shown.
1.
REMOVE RIGHT FRONT CONSOLE PANEL (1).
a.
Remove four screws (2) and grommets (3).
b.
Tag and disconnect electrical plugs to control
panel (4).
NOTE
On left control panel it will be
necessary to remove two air lines to
air pressure gauge.
c.
Lift out control panel (1).
2.
INSPECT PARTS FOR DAMAGE. REPLACE AS
REQUIRED.
INSTALLATION:
1.
INSTALL RIGHT FRONT CONSOLE PANEL (1).
a.
Connect tagged electrical plugs END OF TASK
(4).
b.
Align control panel (1) with right front cab
console.
c.
Install four screws (2) and grommets (3).
2.
CONNECT GROUND CABLE AT SHUNT. REFER
TO PAGE 8-109.)
END OF TASK
8-11
