TM 5-3810-306-20
SIDE CONSOLE PANEL LIGHT (BULB) REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Rear access panel removed. (Refer to page 8-21.)
REMOVAL:
1.
REMOVE PANEL LIGHT (3).
a
Tag and disconnect electrical wires (5).
b.
Remove nut (4).
c.
Lift light (3) from panel.
d.
Unscrew and remove cap (6).
e.
Remove filter cap (1) from bulb.
2.
INSPECT PARTS FOR DAMAGE. REPLACE AS
REQUIRED. IF BULB (2) IS BLOWN, PUSH
DOWN AND TURN BULB (2). LIFT BULB (2)
FROM SOCKET AND DISCARD.
INSTALLATION:
1.
INSTALL PANEL LIGHT (3).
a
Put bulb (2) in socket. Push in and turn.
b.
Slide filter cap (1) over bulb (2).
c.
Put light (3) through panel. d. Install nut (4).
d.
Remove tags. Connect electrical wires (5).
2.
INSTALL REAR ACCESS PANEL. REFER TO
PAGE 8-21.)
3. CONNECT GROUND CABLE AT SHUNT.
(REFER TO PAGE 8-109.)
4.
TURN
ON
FLOOD
LIGHTS
TO
TEST
OPERATION. (REFER TO TM 5-3810-306-10.)
END OF TASK
8-23
