TM 5-3810-306-20
ROTARY SWITCH REPLACEMENT
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
Right front control panel removed. (Refer to page 8-11.)
REMOVAL:
NOTE
Use this task to remove and install
skylight
wiper
and
front
wiper
switches (4). Front wiper rotary
switch (4) is shown.
1.
REMOVE ROTARY SWITCH (4).
a
Tag and disconnect electrical wires (1).
b.
Pull off knob (2).
c.
Remove nut (3). Remove switch from panel.
INSTALLATION:
1.
INSTALL ROTARY SWITCH (4).
a.
Put switch (4) through panel.
b.
Install nut (3) and knob (2).
c.
Remove tags. Connect electrical wires (1) to
switch (4).
2.
INSTALL RIGHT FRONT CONTROL PANEL.
(REFER TO PAGE 8-11.)
3.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
4.
TURN KNOB (2) TO TEST SWITCH (4). (REFER
TO TM 5-3810-306-10.)
END OF TASK
8-20
