FUEL FILTER CABLE ASSEMBLY

BACK-UP LIGHT OIL PRESSURE SWITCH REPLACEMENT

TM-5-3810-306-20 Container Crane 40-Ton Rough Terrain Model RTB75CC Manual
Page Navigation
220

TM 5-3810-306-20 FUEL FILTER CABLE ASSEMBLY TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033) SUPPLIES: None EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.) REMOVAL: 1. REMOVE FUEL FILTER CABLE (6). a. Open DCA box cover by loosening retaining screws (1). b. Tag and disconnect black (2) and white (3) wires from terminal strip. c. Remove grounding wire (4). d. Loosen strain relief fitting (5), removing cable (6) from DCA box. e. Remove opposite end cable from fuel filter pressure switch. INSTALLATION: 1. INSTALL FUEL FILTER CABLE (6). a. Connect socket end of cable (6) onto fuel filter pressure switch. b. Route cable through cable clamps. c. Route cable (6) through strain relief fitting (5) on DCA box and connect tagged wires (2) and (3). d. Tighten strain relief fitting (5). e. Connect ground wire (4). f. Secure DCA box cover. 2. CONNECT GROUND CABLE AT SHUNT (REFER TO PAGE 8-109.) 3. PERFORM STE/ICE TEST TO CHECK FOR PROPER OPERATION. (REFER TO PAGE 3-57.). END OF TASK 8-68

Privacy Statement
Press Release
Contact