TM 5-3810-306-20
FUEL PRESSURE CABLE ASSEMBLY
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS:
Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE FUEL PRESSURE CABLE (8).
a.
Open DCA box cover by loosening retaining
screws (1)
b.
Tag and disconnect red (2), black (3), green (4)
and white (5) from terminal strip.
c.
Remove grounding wire (6).
d.
Loosen strain relief fitting (7), remove cable from
box.
e.
Remove opposite end of cable (8) from fuel
supply pressure transducer.
INSTALLATION:
1. INSTALL FUEL PRESSURE CABLE (8).
a.
Connect socket end of cable (8) onto fuel supply
pressure transducer cable.
b.
Route cable through cable clamps.
c.
Route cable through strain relief fitting (7) on
DCA box and connect tagged wires (2), (3), (4)
and 5).
d.
Tighten strain relief fitting (7).
e.
Connect ground wire (6).
f.
Secure DCA box cover.
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
PERFORM STE/ICE TEST TO CHECK FOR
PROPER OPERATION. (REFER TO PAGE 3-57).
END OF TASK
8-70
