TM 5-3810-306-20
PULSE TACH CABLE ASSEMBLY
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE PULSE TACHOMETER CABLE (6).
a.
Open DCA box cover by loosening retaining
screws (1).
b.
Tag and disconnect black (2) and 3-57.) white
(3) wires from terminal strip.
c.
Remove grounding wire (4).
d.
Loosen strain relief fitting (5), remove cable (6)
from DCA box.
e.
Remove opposite end of cable from pulse
tachometer.
INSTALLATION:
1.
INSTALL PULSE TACHOMETER CABLE (6).
a.
Connect socket end of cable (6) onto pulse
tachometer.
b.
Route cable through cable clamps.
c.
Route cable through strain relief fitting on DCA
box and connect tagged wires (2) and (3).
d.
Tighten strain relief fitting (5).
e.
Connect ground wire (4).
f.
Secure DCA box cover.
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
PERFORM STE/ICE TEST TO CHECK FOR
PROPER OPERATION. (REFER TO PAGE 3-57).
END OF TASK
8-72
