TM 5-3810-306-20
d.
Connect three connector plugs to swivel mount
as tagged.
e.
Connect wires to boom flood light harness as
tagged.
f.
Connect connector plug to load moment
indicator central processing unit as tagged.
g.
Connect wires to boom elevation limit switch as
tagged.
h.
Connect wires to hydraulic oil cooler by-pass
solenoid as tagged.
i.
Connect wires to hydraulic oil cooler temperature
switch as tagged.
j.
Connect wires to neutral safety switch as tagged.
k.
Connect connector plug to right front console
harness as tagged.
l.
Connect connector plug to left front console
harness as tagged.
m.
Connect connector plug to side console harness
as tagged.
n.
Connect wire #21 to side console harness as
tagged.
o.
Connect connector plug to cab interior harness
as tagged.
p.
Connect connector plug to distribution panel
harness as tagged.
q.
Connect black ground wire and wire #5 to
distribution panel as tagged.
r.
Install more tie straps as needed to support
superstructure harness and prevent chafing.
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
CHECK ELECTRICAL SYSTEM FOR PROPER
OPERATION. (REFER TO TM 5-3810-306-10.).
END OF TASK
8-84
