TM 5-3810-306-20
BLACKOUT LIGHTS HARNESS
TOOLS: General mechanic’s tool kit: automotive (5180-00-177-7033)
SUPPLIES:
None
EQUIPMENT CONDITIONS: Disconnect ground cable at shunt. (Refer to page 8-109.)
REMOVAL:
1.
REMOVE BLACKOUT LIGHTS HARNESS.
a.
Tag and disconnect wires at left and right rear
blackout lights.
b.
Tag and disconnect wires at left and right front
blackout lights.
c.
Tag and disconnect wire at blackout headlight.
d.
Disconnect connector plug at carrier harness.
e.
Remove tie straps and/or clamps securing
harness to crane and remove blackout lights
harness.
2.
INSPECT BLACKOUT LIGHTS HARNESS FOR
DAMAGE AND REPLACE PARTS OR HARNESS
AS REQUIRED.
INSTALLATION:
1.
INSTALL BLACKOUT LIGHTS HARNESS.
a.
Position blackout lights harness in crane and
maintain in position with tie straps and/or clamps
as needed.
b.
Connect connector plug to carrier harness.
c.
Connect wire to blackout headlight as tagged.
d.
Connect wires to left and right front blackout
lights as tagged.
e.
Connect wires to left and right rear blackout
lights as tagged.
f.
Install more tie straps as required to support
blackout lights harness in crane and prevent
chafing.
2.
CONNECT GROUND CABLE AT SHUNT. (REFER
TO PAGE 8-109.)
3.
CHECK BLACKOUT LIGHTS FOR PROPER8-86
OPERATION. (REFER TO TM 5-3810-306-10.)
END OF TASK
8-86
