TM 5-3810-305-23
0077
INSPECTION
Inspect parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
INSTALLATION
WARNING
Weight of toolbox is approximately 180 lb (82 kg). Use adequate lifting equipment to support
toolbox. DO NOT lift over personnel or let personnel walk underneath suspended load. Failure
to follow this warning may cause injury or death to personnel.
1.
Support toolbox (Figure 3, Item 2) in suitable blocking or floor jack.
2.
Install toolbox (Figure 3, Item 2), six washers (Figure 3, Item 4) and capscrews (Figure 3, Item 3) on
vehicle (Figure 3, Item 1).
3.
Install all tools and spare parts removed earlier from toolbox (Figure 3, Item 2).
4.
Using three capscrews (Figure 3, Item 6) and new locknuts (Figure 3, Item 5) secure hand pump
(Figure 3, Item 7) to inside of toolbox (Figure 3, Item 2).
2
3
1
4
7
6
5
M1251105
Figure 3.
Battery Box and Toolbox Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00083)