TM 5-3810-305-23
0077
REMOVAL - Continued
5.
Remove three locknuts (Figure 2, Item 5), capscrews (Figure 2, Item 6), and hand pump (Figure 2, Item 7)
from inside of toolbox (Figure 2, Item 2). Discard locknuts.
6.
Remove all tools and spare parts from toolbox (Figure 2, Item 2).
WARNING
Weight of toolbox is approximately 180 lb (82 kg). Use adequate lifting equipment to support
toolbox. DO NOT lift over personnel or let personnel walk underneath suspended load. Failure
to follow this warning may cause injury or death to personnel.
7.
Support toolbox (Figure 2, Item 2) with suitable blocking or a floor jack.
8.
Remove six capscrews (Figure 2, Item 3), washers (Figure 2, Item 4), and toolbox (Figure 2, Item 2) from
vehicle (Figure 2, Item 1).
2
3
1
4
7
6
5
M1251105
Figure 2. Battery Box and Toolbox Removal.
END OF TASK
CLEANING
Clean parts IAW General Maintenance Instructions (WP 0162).
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00083)